FORK LIFT ATTACHMENTS
At Beeweb Ltd we now offer a large selection of fork lift attachments such as mounted jibs and hooks. with multiple lifting positions, these attachments are a great alternative to hiring expensive lifting equipment and turn your fork lift into a multi purpose lifting tool. All attachments are fit for purpose and are made to last and produced in the UK. Bespoke lifting attachments are also available.
For further information and prices you can phone us on 01706 648717 or email us at sales@beewebltd.co.uk or click the link below and fill out the for at the bottom of the page.
Model: IFH
Fork Mounted Hooks provide an economical and safe method of converting a forklift truck into a mini mobile crane. Multiple lifting positions can be achieved along the fork blade.
Model: IAH
The Adjustable Fork Mounted Hook provides a quick and economical method of the lifting and positioning of unpalletised loads. Multiple lifting positions can be achieved by the correct positioning of the attachment along the fork blade.
Model: ICJ
When dedicated lifts are needed on a regular basis the carriage mounted jib delivers the perfect substitute to an overhead crane or static floor mounted jib arm. With the added benefit of a reduced lost load centre and centre of gravity over and above the fork mounted version.
Model: IEJ
Like the fork mounted jib, the extending version allows the movement of long and awkward loads from inaccessible locations with up to 9 different lifting positions and with the added benefit of two hooks and shackles so as to ‘cradle’ your load.
Model: IFJ
When height is not a premium, but maximum lift capacity is critical, the fork mounted jib allows the movement of long and awkward loads from inaccessible locations with the potential of 4 different lifting centres.
Model: ILP
When height is at a premium the low profile jib allows the movement of long and awkward loads from inaccessible locations, with the potential of 5 different lifting centres.
Model: ILEP
Like the low profile jib, the extending version allows the movement of long and awkward loads from inaccessible locations but with up to 10 different lifting positions and with the added benefit of two hooks and shackles to ‘cradle’ your load.
Model:IAEJ
The Height Adjustable Extending Jib has all the characteristics of the standard incline fixed jib with the additional benefit of angular lifts. This allows tall and awkward loads to be lifted by increasing the lift height of the fork lift truck or tele handler.
Model: IRTJ
The quick hitch roof truss jib is an ideal attachment when trying to place trusses in to the middle of a plot. We can manufacture the attachment to fit Manitou, Dieci and JCB machines offering forward reach when placing at height and design carry.
Model: HS – SBC
Specifically designed for the safe movement of sacks, ballast or similar by hooping through all four welded lifting hooks, due to its single lifting eye, the unit can be fitted to overhead crane, HIAB or Forklift via swivel hook.
Model: ISB
The crane / excavator slung spreader beam is an ideal attachment for the lifting and laying of rolls and liners as used on land fill sites, man made ponds and bankings.